ODROID-X2 Android 4.1 Beta-1.2 image file for SD/eMMC.
Platform : ODROID-X2
Hit : 2,996
ODROID-X2 Android 4.1 Jelly Bean(JB) Beta 1.2 image file for SD card. Refer our blog (this LINK) how to copy the image file to the SD Card. Warning! When you write the image to your SD card you will lose all data that was on the card.
What's new from previous Beta 1.1 - SuperUser is activated (Rooted by default) - Wrong key map of Terminal app is fixed - Reboot item is added in power off menu - GMS-JB stability is improved
Issues! This is our very early version of Android 4.1. So there are many known/unknown issues. - USB Device accessory(USB-IO-KIT) is not compatible. - Heavy network traffic may cause the system hang. (We will fix it in next release) - Over-clock driver is not activated due to stability issue. (We will fix it in next release) Any feedback welcome!
To update your eMMC with the Beta 1.2 image, follow this instruction. 1. Download eMMC installer image file. ===> http://dn.odroid.com/Android_Beta_1.2/x2/emmc_recovery_for_odroidx2.zip 2. Unzip and write (do not copy and paste. If your OS is Windows, please use wind32imagewriter.) the img file into your spare SD card. 512MB or higher capacity is required. Refer this LINK for writing an image to SD. 3. Connect the boot option jumper JP2 to "SD boot" 4.
Plug the DC power and wait about 30~40 seconds of installation. (2 blue
LEDs turned on for installation and turned off automatically) 5. Unplug the DC power after installation. 6. Remove the JP2 for the eMMC boot mode and remove the installer SD card. 7. Turn on your board and enjoy.